Jm 1484 Running Gear Manual de usuario descargar pdf (Pagina 12)

Parts List for New Style

Hydraulic

DISC Brakes

Parts List

Model Serial #

1384L 13227

1384S 01666

1484 02256

1592 03669

2492 01650

For 2004 Running Gears and newer,

beginning with the corresponding

serial number...

Brake Line Assembly

# Part # Description Qty

1 OTW-1324 Outer Tongue Weldment 1

2 ITW-1324 Inner Tongue Weldment 1

3 TL-1324 Tongue Latch 1

4 SS-615NS Small Spring In Latch 1

5 17G2B 1" x 7" Bolt (Grade 2) 3

6 1LN 1" Lock Nut 3

7 BL-58 Brake Limiter 2

8 19G8B 1" x 9" Bolt (Grade 8) 1

9 CS-178714 Compression Spring 1

10 1RN 1" Regular Nut 2

11 TB-1215 Tongue Bolt 1

12 HN-114 1 1/4" Hex Nut 1

13 SMC-1 Shield for Master Cylinder 1

14 124-JB 1/2" x 4" J-Bolt 2

15 12-N 1/2" Regular Nut 4

16 381-FB 3/8" x 1" Flange Bolt 6

17 BLOL-1 Brake Lock Out Latch 1

18 MCA-DC1 Master Cylinder Assembly 1

19 RCMC-1324 Replacement Cap for M/Cyl. 1

20 383G8B 3/8" x 3" Bolt (Grade 8) 2

21 PRE-1 Plunger Rod End 1

22 MBMC-DC2 Mounting Bracket (2 pcs) for

Master Cylinder

23 38-FN 3/8" Flange Nut 4

24 38-LN 3/8" Lock Nut 2

25 PP-1D Plunger Pole 1

26 CA-1424 Brake Caliper Assembly 2

27 BP-1424 Brake Pad 4

28 SCA-1415 Seal for Caliper Assembly 4

29 BCA-1415 Boot for Caliper Assembly 4

30 CCA-1415N Cup for Caliper Assembly 4

# Part # Description Qty

31 BD-1314 Brake Disc (13-14 Ton) 2

31 BD-15 Brake Disc (15 Ton) 2

31 BD-24 Brake Disc (24 Ton) 2

32 SP-1324L Brake Support Arm (Left) 1

33 SP-1324R Brake Support Arm (Right) 1

34 BG-1 Brake Guard (13-15 Ton) 2

34 G-24 Brake Guard (24 Ton) 2

35 RT-1415 Retainer with Bolt 2

36 TS-1415 Tension Spring 2

37 RB-1415 Rubber Boot on Master Cylinder 1

38 GR-1415 Rubber Grommet 2

39 SKMC-1324 Seal Kit for Master Cylinder 1

40 WS-24 Wire Spring (anti-rattle) 2

41 DOT5-BF Container DOT 5 Brake Fluid 2

42 12114-G5 1/2" x 1 1/4" Bolt w/Lock Wash. 12

43 WB-41L Wheel Stud (

Long Knurl)(13-14T)

44 H-812-1B Hub, Faced for Brakes (13-14T) 2

44 107751-B Hub, Faced for Brakes (15T) 2

44 W-871B Hub, Faced for Brakes (24T) 2

45 BS-24 Bleeder Stem 2

46 CF-1324 Fitting for Caliper 2

47 FMC-1324 Fitting for Master Cylinder 1

48 HH-1424 1/4" x 24" Hydraulic Hose 1

50 ST-96 3/16" Brake Line x 96" (13-15T) 1

50 ST-120 3/16" Brake Line x 120" (24T) 1

51 ST-53 3/16" Brake Line x 53" 2

52 10606 Tee 1

53 SC-1324 Spring Clips 6

Instructions for Adjusting the Plunger Rod

1. Pull on the tongue so the latch is tight against the stop.

2. Loosen the Hex Nut between the Plunger Rod and Plunger Pole. Adjust the Plunger Rod so there is 1/8” to

3/16” play between the plunger rod and master cylinder. IMPORTANT: If there is NO Free Travel between the

activator and the master cylinder, the brakes will always be on, allowing the brakes to get hot and fail.

3. Add Brake Fluid (DOT 5) to the master cylinder and bleed air from the lines.

1 2 ... 7 8 9 10 11 12 13 14 15

Comentarios a estos manuales

Sin comentarios

Jm 1484 Running Gear Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Jm 1484 Running Gear